當前位置：橡膠氣囊加工工藝
橡膠氣囊加工工藝：
Rubber air bag processing technology:
![<a id=]()
橡膠氣囊加工工藝：" src="/uploads/190305/1-1Z305162033407.jpg" style="width: 500px; height: 406px;" />
1、橡膠出產模型製品的去邊修整，使製品表麵光潔、外形尺寸達到要求；
1. Trimming of rubber production model products to make the surface of products bright and clean and the external dimensions meet the requirements;
2、 通過一些特殊工藝加工，如對製品表麵進行處置，使特殊的一種用途的製品的運用性能有所提髙；
2, through some special processing, such as the treatment of the surface of the products, so as to improve the performance of a special purpose of the products;
3、對含有織物骨架的製品如膠帶、輪胎等製品要進行熱拉伸冷卻和硫化後在充大氣的壓力力下冷卻，以擔保製品尺寸、形狀牢穩和令稱呼心的運用性能。
3, the fabric containing the framework of products such as rubber tape, tires and other products to hot stretch cooling and curing in the air under the pressure of cooling, to ensure that the size of the products, shape is stable and make the heart of the application of performance.
![橡膠<a id=]()
空氣彈簧" src="/uploads/190305/1-1Z30516205H95.jpg" style="width: 500px; height: 406px;" />
橡膠出產模型在硫化時，膠料畢然會延著出產模型的分型麵等部位流出，形成溢流膠邊，也稱為毛邊或飛邊，膠邊的多少及厚薄決定於出產模型的結構、精確度、平板硫化機平板的平行度和裝膠餘膠量。現在的沒有邊際出產模型出產的製品，膠邊尤其薄， 有時刻起模時就被帶掉或輕輕一擦就可以去掉。但這種出產模型成本較高，易損傷，大部分數橡膠模製品在硫化在這以後都需求修整處置。
During vulcanization of rubber production model, the rubber material will flow out along the parting surface and other parts of the production model, forming an overflow rubber edge, also known as rough or flying edge. The amount and thickness of the rubber edge is determined by the structure, precision of the production model, the parallelism of the plate vulcanizing machine and the amount of glue left after loading.Now there is no marginal production model products, plastic edge is particularly thin, when there is a moment from the mold is taken away or gently wipe can be removed.But this production model cost is high, easy to damage, most of the rubber mold products in vulcanization after this need to repair disposal.
Rubber air bag processing technology:
1. Trimming of rubber production model products to make the surface of products bright and clean and the external dimensions meet the requirements;
2、 通過一些特殊工藝加工，如對製品表麵進行處置，使特殊的一種用途的製品的運用性能有所提髙；
2, through some special processing, such as the treatment of the surface of the products, so as to improve the performance of a special purpose of the products;
3、對含有織物骨架的製品如膠帶、輪胎等製品要進行熱拉伸冷卻和硫化後在充大氣的壓力力下冷卻，以擔保製品尺寸、形狀牢穩和令稱呼心的運用性能。
3, the fabric containing the framework of products such as rubber tape, tires and other products to hot stretch cooling and curing in the air under the pressure of cooling, to ensure that the size of the products, shape is stable and make the heart of the application of performance.
During vulcanization of rubber production model, the rubber material will flow out along the parting surface and other parts of the production model, forming an overflow rubber edge, also known as rough or flying edge. The amount and thickness of the rubber edge is determined by the structure, precision of the production model, the parallelism of the plate vulcanizing machine and the amount of glue left after loading.Now there is no marginal production model products, plastic edge is particularly thin, when there is a moment from the mold is taken away or gently wipe can be removed.But this production model cost is high, easy to damage, most of the rubber mold products in vulcanization after this need to repair disposal.